@article { author = {Ganji Noroozi, Z and M. V. Samani, J and Morid, S}, title = {Uncertainty Analysis of Reservoir Sedimentation}, journal = {Iran-Water Resources Research}, volume = {4}, number = {1}, pages = {1-8}, year = {2008}, publisher = {Iranian Water Resources Association}, issn = {1735-2347}, eissn = {2476-7360}, doi = {}, abstract = {Estimation of reservoir sedimentation volume is necessary for design and hydraulic structure management purposes where different empirical and mathematical methods are employed in this regard. Due to different factors effecting sedimentation process and their stochastic process, uncertainties arise which cause failure and may force designers to consider safety factors in their designs. Therefore, uncertainty analysis may introduce a better understanding of the effect of different input parameters and their separate contributions to the whole output error. In this research, the sediment discharge rate was estimated by employing different methods such as USBR, average of classes, and the FAO modification coefficient. In these methods data collected from Yalfan hydrometry and Shakhe Dovom SAD stations were used. To calculate the trap efficiency the Brown method, and for specific weight Lane & Koelzer and Miller methods were used. The results of the FAO modification coefficient on average of classes and specific weight of Miller method compared to other corresponding methods show better agreement with the measured ones. In this research, Mont Carlo Simulation and Har's methods were investigated. Calculation of The Mont Carlo method and the uncertainty contribution of each parameter were conducted by a FORTRAN computer program introduced by the author. The results show that the sediment discharge rate and the flow rate introduce the highest contribution to the whole uncertainty of sedimentation volume, respectively. Also, Har's method show less uncertainty value compared to the Mont Carlo method.}, keywords = {Sediment Volume,USBR,FAO,Uncertainty,Monte Carlo,Point Harr}, title_fa = {بررسی عدم قطعیت حجم رسوب مخازن سدها}, abstract_fa = {برآورد حجم رسوب ورودی به مخازن سدها از ضرورت‌های طراحی و مدیریت تأسیسات آبی می‌باشد. روش‌های تجربی و ریاضی مختلفی جهت برآورد حجم رسوب موجود است اما همواره این روش‌ها دارای قطعیت نبوده و باعث شکست پروژه یا استفاده از ضرایب اطمینان بالا می‌شود, در این راستا تحلیل عدم قطعیت می‌تواند راهگشا باشد. دراین تحقیق، جهت برآورد دبی رسوب ورودی به سد، روش‌های  USBRمتوسط دسته‌ها و تعدیل ضریب FAOاستفاده شده است. نتایج به دست آمده، در مقایسه با رسوب سنجی مخزن سد اکباتان نشان داد که تعدیل ضریب FAO روی روش متوسط دسته‌ها در برآورد دبی رسوب نتایج مطلوبتری را به همراه داشته است. در بحث عدم قطعیت، دو روش شبیه‌سازی مونت‌کارلو و نقطه‌ای هار مورد بررسی قرار گرفت. بدین طریق که در روش مونت کارلو به دلیل حجم بالای محاسبات, از برنامه کامپیوتری نوشته شده توسط نگارنده به زبان FORTRAN برای بررسی سهم هر پارامتر در عدم قطعیت کلی حجم رسوب و محاسبه عدم قطعیت کلی استفاده گردیده است. طبق نتایج به دست آمده دبی رسوب و پس از آن دبی جریان بیشترین تأثیر و راندمان تله اندازی کمترین تأثیر را در عدم قطعیت حجم رسوب دارا هستند. همچنین روش مونت کارلو عدم قطعیت کلی را برابر با 208/0 و روش هار 179/0 برآورد کرده است.}, keywords_fa = {حجم رسوب,USBR,FAO,عدم قطعیت,مونت‌کارلو,نقطه‌ای هار}, url = {https://www.iwrr.ir/article_15622.html}, eprint = {https://www.iwrr.ir/article_15622_0731cb87623fb40c9574636240c62b97.pdf} }